Share
Share this product
Add your review
Review Limeproof Undercoat Sealer

Limeproof Undercoat Sealer

$23.00
($23.00 Incl. tax)
Limeproof Undercoat Sealer is an undercoat primer or sealer for interior and exterior use, that can be applied to uncoated paintable surfaces as an undercoat sealer--or it can be applied to previously painted surfaces as an undercoat primer.
Description

Limeproof Undercoat Sealer is an undercoat primer or sealer for interior and exterior use, that can be applied to uncoated paintable surfaces as an undercoat sealer.  Or, it can be applied over previously painted surfaces as an undercoat primer prior to the application of any Sydney Harbour paint or finish.  White in color; ultra matte finish.

Limeproof Undercoat Sealer can be applied to most suitably prepared interior or exterior surfaces, including plasterboard, masonry, timber, PVC piping and furniture.   Not suitable over new or bare set plaster or previously oiled timbers.

SURFACE PREP:  New cement, bricks, mortar, filled concrete blocks or pre-cast or in situ concrete should be allowed to cure for up to 56 days before applying Limeproof Undercoat Sealer.  Please refer to the attached Product Data Sheet for details.

APPLICATION:  Apply one or two coats by brush, medium nap roller or spray.  Limeproof Undercoat Sealer will be dry to the touch dry in 1 hour and can be recoated in 6 hours.  Allow 6 hours before applying finish coats.

VOC CONTENT:  21 g/L

COVERAGE:  Up to 450 sq ft/gallon in one coat, depending on surface porosity, texture and method of application.

SIZES:  Quarts, Gallons, 5-Gallons

PRODUCT DATA SHEET: Limeproof Undercoat Sealer